RetroArch/driver.h
Jesse Talavera-Greenberg 938d60d0f4
Add microphone support via a new driver (#14731)
* Some slight fixes

* Update libretro.h

* Log calls to RETRO_ENVIRONMENT_GET_MICROPHONE_INTERFACE

* Finish proof-of-concept for mic support

- It works, but doesn't support floating-point audio yet
- It may need to be resampled, too

* Add macros that aren't available in SDL 2

* Comment out a variable definition for now

- For C89 compliance

* Add some comments for clarity

* Let ALSA tolerate a null new_rate

* Partial ALSA microphone support

- Not yet tested
- Mic is created and destroyed
- Mic can also be paused or unpaused
- Mic is paused or unpaused with the rest of the driver
- Microphone is not yet read

* Install error logging in the ALSA driver

- It defers to RARCH_ERR

* Free the ALSA microphone in alsa_free

* Fix an indent

* First draft of alsa_read_microphone

* Deinitialize SDL Audio in sdl_audio_free

* Save and restore the ALSA error logger

- You should always practice safe global state

* Add newlines to some RARCH_ERRs

* Add some logging

* Check for the mic being active via settings instead of via flags

* Adjusted a log entry to be less misleading

- A frequency of 0Hz looks weird to the uninformed
- In reality, it means the driver used the requested frequency

* Fix an incorrect format string

* Tidy up logging in alsa.c

* Rename audio_enable_microphone to audio_enable_input

* Rename microphone_device to audio_input_device

* Add audio_input_latency and audio_input_block_frames settings

* Add all mic-related settings to the options menu

* Adjust logging for alsa.c

- Log the ALSA library version
- Add errno details

* Refer to the microphone in logs by name

* Use %u instead of %d for some log items

* Add input_samples_buf

* Remove an inaccurate comment

* Change type of input_samples_buf

* Clean up audio_driver_flush_microphone_input

* Comment convert_float_to_s16

- It helped me understand what it's doing
- Turns out it'll work just fine on mono audio

* Don't use the resampler for mic input

* Fix crash in the ALSA driver when reading from a mic

* Update some logging messages

* ALSA support now works for mics

* Reuse some common functions in alsa.c

* Add alsa_thread_microphone_t

* Refactor alsa.c

- Introduce alsa_init_pcm to init any PCM that we're using
- Vastly simplifies the implementation of alsa_init and alsa_init_microphone
- Will be used for the read-based versions next

* Make ALSA logging a little more consistent

* Clean up the mic with alsa_free_microphone if alsa_init_microphone fails

* Remove an unused function

* Move some cleanup in alsa.c to a common function

* First crack at mic support for alsathread

- Refactor some duplicate code into functions
- Use functions introduced in alsa.c
- Create and destroy the mic

* Slight cleanups for clarity

* Implement alsa_thread_set/get_microphone_state

* More work on alsathread

- No more crashing, but the mic just returns silence

* Slight cleanups for clarity

* Add alsa_set_mic_enabled_internal

- For setting the state of a microphone while considering its current state

* Use alsa_set_mic_enabled_internal

* Log a little more info

* Log when the audio driver is started/stopped

* Move base microphone driver code into a new directory

- Add microphone_driver.c to Makefile.common
- Rename functions as needed

* Initialize and deinitialize the microphone driver

* Implement sdl_microphone.c

* Un-const an argument

- In case the driver context needs to do any locking

* Revise comments for microphone_driver.h

* Remove an unimplemented function

* Remove some functions from the mic driver

* Remove mic functions from audio_thread_wrapper

* Remove mic functions from sdl_audio

* Fix microphone_null

* Split the mic code for the alsa audio drivers into microphone drivers

* Fix an extra struct member

* Add a setting for the mic driver

* Add a command to reinitialize the microphone driver

* Rename mic-related settings

* Add DRIVER_MICROPHONE_MASK to DRIVERS_CMD_ALL

* Rename audio_enable_input to microphone_enable

* Remove some labels from qt_options

* Search for microphone_driver within find_driver_nonempty

* Clean up some mic driver code

* Pending mics now return silence

* Adjust some logging and comments

* Some cleanup in the microphone driver

* Invert a flag check

- Oops

* Fix a log message

* Fix the wrong flags being checked

* Slight refactor of wasapi_init_device

- Add a data_flow parameter
- Declare it in a header
- In preparation for WASAPI mic support

* Add some WASAPI macros for _IAudioCaptureClient

* Move some common WASAPI functions to audio/common/wasapi.c

- They'll be used by the mic and the audio drivers

* Add wasapi_log_hr

* Generalize mmdevice_list_new to look for capture devices, too

* Fix a function declaration

* Move driver-specific device_list_new functions into their respective files

* Clean up some declarations

* First draft of wasapi microphone driver

* Add wasapi_microphone_device_list_free

* Change function parameter names to be consistent with microphone_driver

* Partially implement wasapi_microphone_read

- Mostly copied from the audio driver so far
- It doesn't compile yet
- But it'll be beautiful when I'm done with it

* Refactor the mic driver's functions

- Rename get_mic_active to mic_alive
- Split set_mic_active into start_mic and stop_mic
- Refactor the SDL mic driver accordingly

* Edit some WASAPI functions for logging and clarity

* Implement more of the WASAPI mic driver

* Rename write_event to read_event

* Pass the WASAPI driver context to the various read functions

* Mostly implement the read function for the WASAPI mic driver

* Fix a crash in microphone_driver

- Forgot to move the position of the name of null_driver

* Reduce some logging in wasapi common functions

- Only log the chosen audio client format, not all attempted ones

* Add some macro wrappers for IAudioClient methods

* Update mic driver configuration

- Make the mic driver configurable in the menu
- Add config items for WASAPI-related options similar to the audio driver

* Fix a menu entry scrolling through audio devices instead of mic devices

* Add some utility functions

* Expose the new utility functions in wasapi.h

* Add extra logging in the WASAPI common functions

* Add sharemode_name

* Use _IAudioClient_Initialize macro in some places

* Pass channels to wasapi_init_client

- Remember, mics are in mono

* Use _IAudioClient_Initialize macro some more

* Forgot to pass channels in some places

* Add some utility functions

* Forgot an #include

* Add wasapi_select_device_format

* Simplify the format selection logic in wasapi_init_client_sh

* Unset the microphone in wasapi_microphone_close_mic

- Ought to prevent a potential segfault

* Simplify some logging

* Fix incorrect value being passed to _IAudioCaptureClient_ReleaseBuffer

* Remove some unneeded logging

* Add some values to hresult_name

* Polish up wasapi_select_device_format

- Test for formats manually when Windows can't
- Add some debug logging
- Check for channels

* Compute the fields of WAVEFORMATEXTENSIBLE correctly

- As per the doc's stated requirements

* Simplify logic for WASAPI client creation

* Fix a potential hang in wasapi_microphone_read_shared_buffered

* Stop the microphone if the driver is stopped

* Don't name the microphone event

* Ensure that wasapi_init_client reports the correct format and rate

* Implement exclusive microphone read access for WASAPI

* Add _IAudioCaptureClient_GetNextPacketSize macro

* Organize cases in hresult_name

* Clear some extra fields if wasapi_set_format is setting a Pcm format

* Adjust some logs

* Adjust some logs

* Remove unneeded local vars

* Add a log

* Update wasapi.c

* Update wasapi.c

* Fix shared-mode mic support in WASAPI producing broken input

- Turns out it had nothing to do with shared mode

* Reuse a common function

- Remove wasapi_microphone_read_shared_buffered
- Rename wasapi_microphone_read_exclusive to wasapi_microphone_read_buffered

* Remove some code I was using for test purposes

* Clarify some language

* Double the default shared-mode mic buffer length

* Split getting a device's name into a separate function, then use it

* Fix the ALSA mic drivers

- To comply with changes I previously made to the mic driver interface

* Remove unused synchronization primitives from the SDL microphone driver

* Add sdl_microphone_mic_use_float

* Document audio_driver_state_flags

- I needed to understand these to see if similar flags were required for the mic driver

* Remove an unused function in wasapi.c

* Add and document flags in microphone_driver.h

* Remove driver-specific mic start/stop functions

- The mic driver itself doesn't do much processing
- That honor goes to individual mics

* Remove some unused fields in microphone_driver.h

* Add CMD_EVENT_MICROPHONE_STOP/START

* Remove unused functions from microphone_null

* Change how the mic driver state is referenced in some places

* Simplify the SDL microphone driver

- The driver backend no longer keeps a reference to the mic (the frontend does that)
- Remove functions that are no longer needed
- Don't track paused state, just query the mic itself

* Simplify the WASAPI microphone driver

- Don't track the driver running state or the microphone handle, the frontend does that now
- Remove support for unbuffered input (hunterk suggested that it wasn't necessary)

* Make microphone_wasapi_sh_buffer_length a uint, not an int

- It won't be negative anymore
- 0 now represents the default value

* Make the microphone frontend more robust

- Improve documentation for how various functions should be implemented
- Closes all microphones before freeing the driver (so backends don't have to)
- Tracks the enabled state of each microphone, so backends don't have to (but they still can)

* Stop the mic driver in core_unload_game

* Ensure mic support is compatible with the revised menu code

* Move alsa.h into audio/common

* Remove RETRO_ENVIRONMENT_GET_MICROPHONE_ENABLED

- It was never really needed

* Refactor the ALSA microphone driver

- Move common ALSA functions to audio/common/alsa.c
- Replace alsa_set_mic_enabled_internal with alsa_start/stop_pcm
- Don't track the microphone handle in the ALSA driver context
- Remove unneeded fields

* Move some common alsathread code into audio/common/alsathread.c

* Change return type of mic_driver_open_mic_internal to bool

* First crack at resampling mic input

* Remove an extraneous check

- I think something distracted me when I was writing this line

* Add stereo/mono conversion functions

* Make alsa_start_pcm and alsa_stop_pcm more robust

- They now return success if the stream is already running and stopped, respectively

* Revise some mic-related comments in libretro.h

* First crack at resampling mic input

* Simplify an expression

* Simplify an expression

* Fix a log tag

* Allow mic resampler to be configured separately from audio resampler

* Add some comments

* Set the source ratio to something sensible

* Stop deadlock in `alsathread` mic driver

* Allow mics to be initialized even when core is loaded from CLI

- When loading content from CLI, the drivers are initialized a little differently
- That threw off the mic initialization code

* Rename the functions in retro_microphone_interface

* Revise some mic-related comments in libretro.h

* Update retro_microphone_interface

- Add get_mic_rate
- Add a parameter to open_mic
- The modifications don't do anything yet

* Use parameter objects in the microphone handle

* Replace get_mic_rate with get_params

* Add a microphone interface version

* Remove part of a comment

* Set the effective params in mic_driver_microphone_handle_init

* Drop a stray newline

* Change where the mic interface is zeroed

- I was accidentally throwing out the version that the core was asking for

* Reduce logspam for wasapi_set_nonblock_state

- Now it only logs when the sync mode is changed

* Change DEFAULT_WASAPI_SH_BUFFER_LENGTH to 0

- -16 is no longer a valid value

* Set the new_rate in wasapi_init

* Change description of microphone sample rate in the settings

* First attempt at resampling configured mic input

* Forgot a section

* Fix some input samples being skipped

* Rename a variable for clarity

* Add microphone.outgoing_samples

* Update the mic driver

- Processed samples are now buffered
- The resampler is skipped if the ratio is (very close to) 1

* Remove part of a comment

* Update some comments in audio_resampler.h

* Slightly refactor the SDL microphone driver

- Move SDL_AudioSpec to a field of sdl_microphone_handle_t
- Allow SDL to change the requested format and sample rate
- Request floating-point input
- Implement sdl_microphone_mic_use_float

* Fix a non-C89-compliant declaration

* Add new files to griffin.c

* Remove a C++-style comment

* Add two more files to griffin.c

* Remove some unneeded declarations in microphone_driver.h

* Remove a stray comma in configuration.c

- For C89 compliance

* Fix compilation on some platforms

* Change some function signatures

* Make the ALSA drivers always set the audio rate

* Fix the alsathread mic driver

* Make state_manager_frame_is_reversed return false if HAVE_REWIND isn't defined

* Mute the microphone if the core is running in fast-forward, slow-mo, or rewind

* Clarify a comment

* Clarify a comment

* Add a comment

* Don't allocate memory for slowmo samples in the mic driver

- We're not supporting slowmo for mics, so it's not needed

* Fix a {

* Add my name to AUTHORS.h

* Add driver_lifetime_flags

- For drivers that have special setup/teardown needs

* Ensure that resetting the mic driver maintains active mic handles

- Prevents fullscreen toggle from stopping all mic input

* Update CHANGES.md

* Move some default microphone settings to a new part of the config file

* Ensure that RetroArch can use the audio format that Windows suggests

* Remove references to mic support in the SDL audio driver

* Remove unused WASAPI functions

* Return failure if RetroArch couldn't select a WASAPI format

* Ensure that Windows uses the WASAPI mic driver by default

* Treat disabled mic support as a warning, not an error

* Clarify some WASAPI-related microphone settings

* Remove some unused variables

* Add or revise microphone-related comments

* Rearrange doc comments for microphone types in libretro.h

* Remove a space

* Remove some unused flags

* Remove ALSA error logger

- It was never used anyway

* Remove unneeded microphone-related arguments

* Document a parameter

* Remove a logging call

* Add a constant for the microphone's shared buffer length for WASAPI

* Fix stylistic inconsistencies

* Make mic_driver_get_sample_size a macro instead of a function

* Move the microphone implementation to the audio directory

* Make microphone support optional (but enabled by default)

* Fix the griffin build
2023-06-06 21:55:06 +02:00

174 lines
5.1 KiB
C

/* RetroArch - A frontend for libretro.
* Copyright (C) 2010-2014 - Hans-Kristian Arntzen
* Copyright (C) 2011-2017 - Daniel De Matteis
*
* RetroArch is free software: you can redistribute it and/or modify it under the terms
* of the GNU General Public License as published by the Free Software Found-
* ation, either version 3 of the License, or (at your option) any later version.
*
* RetroArch is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
* without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along with RetroArch.
* If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __RARCH_DRIVER__H
#define __RARCH_DRIVER__H
#include <stdint.h>
#include <stdlib.h>
#include <sys/types.h>
#include <boolean.h>
#include <retro_common_api.h>
#include "configuration.h"
#include "retroarch_types.h"
RETRO_BEGIN_DECLS
enum
{
DRIVER_AUDIO = 0,
DRIVER_VIDEO,
DRIVER_INPUT,
DRIVER_CAMERA,
DRIVER_LOCATION,
DRIVER_MENU,
DRIVERS_VIDEO_INPUT,
DRIVER_BLUETOOTH,
DRIVER_WIFI,
DRIVER_LED,
DRIVER_MIDI,
DRIVER_MICROPHONE
};
enum
{
DRIVER_AUDIO_MASK = 1 << DRIVER_AUDIO,
DRIVER_VIDEO_MASK = 1 << DRIVER_VIDEO,
DRIVER_INPUT_MASK = 1 << DRIVER_INPUT,
DRIVER_CAMERA_MASK = 1 << DRIVER_CAMERA,
DRIVER_LOCATION_MASK = 1 << DRIVER_LOCATION,
DRIVER_MENU_MASK = 1 << DRIVER_MENU,
DRIVERS_VIDEO_INPUT_MASK = 1 << DRIVERS_VIDEO_INPUT,
DRIVER_BLUETOOTH_MASK = 1 << DRIVER_BLUETOOTH,
DRIVER_WIFI_MASK = 1 << DRIVER_WIFI,
DRIVER_LED_MASK = 1 << DRIVER_LED,
DRIVER_MIDI_MASK = 1 << DRIVER_MIDI,
DRIVER_MICROPHONE_MASK = 1 << DRIVER_MICROPHONE
};
/**
* These flags indicate special requirements or requests
* of a driver's setup or teardown process.
*
* They are passed to \c drivers_init and \c driver_deinit.
* Not all drivers will need them.
*
* @see drivers_init
* @see driver_deinit
*/
enum driver_lifetime_flags
{
/**
* Indicates that the driver is being reset.
* When passed \c driver_deinit, indicates that the targeted drivers
* are about to be reinitialized.
* When passed to \c driver_init, indicates that the targeted drivers
* are in the middle of being reinitialized.
*
* This is useful for drivers that provide core-accessible resource handles,
* such as the microphone driver.
* When closed by normal means, such drivers will de-allocate the resources
* that their opened handles represent.
* If the game isn't being exited, then these resources would effectively
* be closed while the core might still be using them.
*
* This flag can be used to ensure that existing core-accessible handles
* are reinitialized with valid resources
* before the core notices that anything's wrong.
*/
DRIVER_LIFETIME_RESET = 1 << 0
};
enum driver_ctl_state
{
RARCH_DRIVER_CTL_NONE = 0,
/* Sets monitor refresh rate to new value by calling
* video_monitor_set_refresh_rate(). Subsequently
* calls audio_monitor_set_refresh_rate(). */
RARCH_DRIVER_CTL_SET_REFRESH_RATE,
RARCH_DRIVER_CTL_FIND_FIRST,
RARCH_DRIVER_CTL_FIND_LAST,
RARCH_DRIVER_CTL_FIND_PREV,
RARCH_DRIVER_CTL_FIND_NEXT
};
typedef struct driver_ctx_info
{
const char *label;
char *s;
ssize_t len;
} driver_ctx_info_t;
bool driver_ctl(enum driver_ctl_state state, void *data);
/**
* driver_find_index:
* @label : string of driver type to be found.
* @drv : identifier of driver to be found.
*
* Find index of the driver, based on @label.
*
* Returns: -1 if no driver based on @label and @drv found, otherwise
* index number of the driver found in the array.
**/
int driver_find_index(const char *label, const char *drv);
/* Sets audio and video drivers to nonblock state.
*
* If nonblock state is false, sets blocking state for both
* audio and video drivers instead. */
void driver_set_nonblock_state(void);
/**
* drivers_init:
* @flags : Bitmask of drivers to initialize.
*
* Initializes drivers.
* @flags determines which drivers get initialized.
**/
void drivers_init(settings_t *settings, int flags,
enum driver_lifetime_flags lifetime_flags, bool verbosity_enabled);
/**
* Driver ownership - set this to true if the platform in
* question needs to 'own'
* the respective handle and therefore skip regular RetroArch
* driver teardown/reiniting procedure.
*
* If to true, the 'free' function will get skipped. It is
* then up to the driver implementation to properly handle
* 'reiniting' inside the 'init' function and make sure it
* returns the existing handle instead of allocating and
* returning a pointer to a new handle.
*
* Typically, if a driver intends to make use of this, it should
* set this to true at the end of its 'init' function.
**/
void driver_uninit(int flags, enum driver_lifetime_flags lifetime_flags);
void retro_input_poll_null(void);
RETRO_END_DECLS
#endif