xemu/docs/conf.py
Martin Liška ba1a6723f5 sphinx: change default language to 'en'
Fixes the following Sphinx warning (treated as error) starting
with 5.0 release:

Warning, treated as error:
Invalid configuration value found: 'language = None'. Update your configuration to a valid langauge code. Falling back to 'en' (English).

Signed-off-by: Martin Liska <mliska@suse.cz>
Message-id: e91e51ee-48ac-437e-6467-98b56ee40042@suse.cz
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-06-27 10:39:03 +01:00

322 lines
11 KiB
Python

# -*- coding: utf-8 -*-
#
# QEMU documentation build configuration file, created by
# sphinx-quickstart on Thu Jan 31 16:40:14 2019.
#
# This config file can be used in one of two ways:
# (1) as a common config file which is included by the conf.py
# for each of QEMU's manuals: in this case sphinx-build is run multiple
# times, once per subdirectory.
# (2) as a top level conf file which will result in building all
# the manuals into a single document: in this case sphinx-build is
# run once, on the top-level docs directory.
#
# QEMU's makefiles take option (1), which allows us to install
# only the ones the user cares about (in particular we don't want
# to ship the 'devel' manual to end-users).
# Third-party sites such as readthedocs.org will take option (2).
#
#
# This file is execfile()d with the current directory set to its
# containing dir.
#
# Note that not all possible configuration values are present in this
# autogenerated file.
#
# All configuration values have a default; values that are commented out
# serve to show the default.
import os
import sys
import sphinx
from distutils.version import LooseVersion
from sphinx.errors import ConfigError
# Make Sphinx fail cleanly if using an old Python, rather than obscurely
# failing because some code in one of our extensions doesn't work there.
# In newer versions of Sphinx this will display nicely; in older versions
# Sphinx will also produce a Python backtrace but at least the information
# gets printed...
if sys.version_info < (3,6):
raise ConfigError(
"QEMU requires a Sphinx that uses Python 3.6 or better\n")
# The per-manual conf.py will set qemu_docdir for a single-manual build;
# otherwise set it here if this is an entire-manual-set build.
# This is always the absolute path of the docs/ directory in the source tree.
try:
qemu_docdir
except NameError:
qemu_docdir = os.path.abspath(".")
# If extensions (or modules to document with autodoc) are in another directory,
# add these directories to sys.path here. If the directory is relative to the
# documentation root, use an absolute path starting from qemu_docdir.
#
# Our extensions are in docs/sphinx; the qapidoc extension requires
# the QAPI modules from scripts/.
sys.path.insert(0, os.path.join(qemu_docdir, "sphinx"))
sys.path.insert(0, os.path.join(qemu_docdir, "../scripts"))
# -- General configuration ------------------------------------------------
# If your documentation needs a minimal Sphinx version, state it here.
#
# Sphinx 1.5 and earlier can't build our docs because they are too
# picky about the syntax of the argument to the option:: directive
# (see Sphinx bugs #646, #3366).
needs_sphinx = '1.6'
# Add any Sphinx extension module names here, as strings. They can be
# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
# ones.
extensions = ['kerneldoc', 'qmp_lexer', 'hxtool', 'depfile', 'qapidoc']
if sphinx.version_info[:3] > (4, 0, 0):
tags.add('sphinx4')
extensions += ['dbusdoc']
else:
extensions += ['fakedbusdoc']
# Add any paths that contain templates here, relative to this directory.
templates_path = [os.path.join(qemu_docdir, '_templates')]
# The suffix(es) of source filenames.
# You can specify multiple suffix as a list of string:
#
# source_suffix = ['.rst', '.md']
source_suffix = '.rst'
# The master toctree document.
master_doc = 'index'
# Interpret `single-backticks` to be a cross-reference to any kind of
# referenceable object. Unresolvable or ambiguous references will emit a
# warning at build time.
default_role = 'any'
# General information about the project.
project = u'QEMU'
copyright = u'2022, The QEMU Project Developers'
author = u'The QEMU Project Developers'
# The version info for the project you're documenting, acts as replacement for
# |version| and |release|, also used in various other places throughout the
# built documents.
# Extract this information from the VERSION file, for the benefit of
# standalone Sphinx runs as used by readthedocs.org. Builds run from
# the Makefile will pass version and release on the sphinx-build
# command line, which override this.
try:
extracted_version = None
with open(os.path.join(qemu_docdir, '../VERSION')) as f:
extracted_version = f.readline().strip()
except:
pass
finally:
if extracted_version:
version = release = extracted_version
else:
version = release = "unknown version"
# The language for content autogenerated by Sphinx. Refer to documentation
# for a list of supported languages.
#
# This is also used if you do content translation via gettext catalogs.
# Usually you set "language" from the command line for these cases.
language = 'en'
# List of patterns, relative to source directory, that match files and
# directories to ignore when looking for source files.
# This patterns also effect to html_static_path and html_extra_path
exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
# The name of the Pygments (syntax highlighting) style to use.
pygments_style = 'sphinx'
# If true, `todo` and `todoList` produce output, else they produce nothing.
todo_include_todos = False
# Sphinx defaults to warning about use of :option: for options not defined
# with "option::" in the document being processed. Turn that off.
suppress_warnings = ["ref.option"]
# The rst_epilog fragment is effectively included in every rST file.
# We use it to define substitutions based on build config that
# can then be used in the documentation. The fallback if the
# environment variable is not set is for the benefit of readthedocs
# style document building; our Makefile always sets the variable.
confdir = os.getenv('CONFDIR', "/etc/qemu")
rst_epilog = ".. |CONFDIR| replace:: ``" + confdir + "``\n"
# We slurp in the defs.rst.inc and literally include it into rst_epilog,
# because Sphinx's include:: directive doesn't work with absolute paths
# and there isn't any one single relative path that will work for all
# documents and for both via-make and direct sphinx-build invocation.
with open(os.path.join(qemu_docdir, 'defs.rst.inc')) as f:
rst_epilog += f.read()
# -- Options for HTML output ----------------------------------------------
# The theme to use for HTML and HTML Help pages. See the documentation for
# a list of builtin themes.
#
try:
import sphinx_rtd_theme
except ImportError:
raise ConfigError(
'The Sphinx \'sphinx_rtd_theme\' HTML theme was not found.\n'
)
html_theme = 'sphinx_rtd_theme'
# Theme options are theme-specific and customize the look and feel of a theme
# further. For a list of options available for each theme, see the
# documentation.
if LooseVersion(sphinx_rtd_theme.__version__) >= LooseVersion("0.4.3"):
html_theme_options = {
"style_nav_header_background": "#802400",
"navigation_with_keys": True,
}
html_logo = os.path.join(qemu_docdir, "../ui/icons/qemu_128x128.png")
html_favicon = os.path.join(qemu_docdir, "../ui/icons/qemu_32x32.png")
# Add any paths that contain custom static files (such as style sheets) here,
# relative to this directory. They are copied after the builtin static files,
# so a file named "default.css" will overwrite the builtin "default.css".
html_static_path = [os.path.join(qemu_docdir, "sphinx-static")]
html_css_files = [
'theme_overrides.css',
]
html_js_files = [
'custom.js',
]
html_context = {
"display_gitlab": True,
"gitlab_user": "qemu-project",
"gitlab_repo": "qemu",
"gitlab_version": "master",
"conf_py_path": "/docs/", # Path in the checkout to the docs root
}
# Custom sidebar templates, must be a dictionary that maps document names
# to template names.
#html_sidebars = {}
# Don't copy the rST source files to the HTML output directory,
# and don't put links to the sources into the output HTML.
html_copy_source = False
# -- Options for HTMLHelp output ------------------------------------------
# Output file base name for HTML help builder.
htmlhelp_basename = 'QEMUdoc'
# -- Options for LaTeX output ---------------------------------------------
latex_elements = {
# The paper size ('letterpaper' or 'a4paper').
#
# 'papersize': 'letterpaper',
# The font size ('10pt', '11pt' or '12pt').
#
# 'pointsize': '10pt',
# Additional stuff for the LaTeX preamble.
#
# 'preamble': '',
# Latex figure (float) alignment
#
# 'figure_align': 'htbp',
}
# Grouping the document tree into LaTeX files. List of tuples
# (source start file, target name, title,
# author, documentclass [howto, manual, or own class]).
latex_documents = [
(master_doc, 'QEMU.tex', u'QEMU Documentation',
u'The QEMU Project Developers', 'manual'),
]
# -- Options for manual page output ---------------------------------------
# Individual manual/conf.py can override this to create man pages
man_pages = [
('interop/qemu-ga', 'qemu-ga',
'QEMU Guest Agent',
['Michael Roth <mdroth@linux.vnet.ibm.com>'], 8),
('interop/qemu-ga-ref', 'qemu-ga-ref',
'QEMU Guest Agent Protocol Reference',
[], 7),
('interop/qemu-qmp-ref', 'qemu-qmp-ref',
'QEMU QMP Reference Manual',
[], 7),
('interop/qemu-storage-daemon-qmp-ref', 'qemu-storage-daemon-qmp-ref',
'QEMU Storage Daemon QMP Reference Manual',
[], 7),
('system/qemu-manpage', 'qemu',
'QEMU User Documentation',
['Fabrice Bellard'], 1),
('system/qemu-block-drivers', 'qemu-block-drivers',
'QEMU block drivers reference',
['Fabrice Bellard and the QEMU Project developers'], 7),
('system/qemu-cpu-models', 'qemu-cpu-models',
'QEMU CPU Models',
['The QEMU Project developers'], 7),
('tools/qemu-img', 'qemu-img',
'QEMU disk image utility',
['Fabrice Bellard'], 1),
('tools/qemu-nbd', 'qemu-nbd',
'QEMU Disk Network Block Device Server',
['Anthony Liguori <anthony@codemonkey.ws>'], 8),
('tools/qemu-pr-helper', 'qemu-pr-helper',
'QEMU persistent reservation helper',
[], 8),
('tools/qemu-storage-daemon', 'qemu-storage-daemon',
'QEMU storage daemon',
[], 1),
('tools/qemu-trace-stap', 'qemu-trace-stap',
'QEMU SystemTap trace tool',
[], 1),
('tools/virtfs-proxy-helper', 'virtfs-proxy-helper',
'QEMU 9p virtfs proxy filesystem helper',
['M. Mohan Kumar'], 1),
('tools/virtiofsd', 'virtiofsd',
'QEMU virtio-fs shared file system daemon',
['Stefan Hajnoczi <stefanha@redhat.com>',
'Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>'], 1),
]
man_make_section_directory = False
# -- Options for Texinfo output -------------------------------------------
# Grouping the document tree into Texinfo files. List of tuples
# (source start file, target name, title, author,
# dir menu entry, description, category)
texinfo_documents = [
(master_doc, 'QEMU', u'QEMU Documentation',
author, 'QEMU', 'One line description of project.',
'Miscellaneous'),
]
# We use paths starting from qemu_docdir here so that you can run
# sphinx-build from anywhere and the kerneldoc extension can still
# find everything.
kerneldoc_bin = ['perl', os.path.join(qemu_docdir, '../scripts/kernel-doc')]
kerneldoc_srctree = os.path.join(qemu_docdir, '..')
hxtool_srctree = os.path.join(qemu_docdir, '..')
qapidoc_srctree = os.path.join(qemu_docdir, '..')
dbusdoc_srctree = os.path.join(qemu_docdir, '..')
dbus_index_common_prefix = ["org.qemu."]